Leather Resurfacing – Dyeing A Leather Seat

Resurfacing a leather seat in your car with today’s leathers involve a actual approach and the ideal leather dye to realize a experienced work. There are two sorts of leather that I have witnessed and worked on in today’s leather car or truck seats. You have suede leather or as some connect with it the tender leather and you have the finished leather which is largely what you see. The leather dyes you use are totally various as well. Aniline dye is applied with the tender things and a h2o borne urethane dye for the finished leathers, both mixed with premium tannery pigments. Resurfacing leather applies to the finished leather, when you dye suede the aniline dye is a penetrating dye, so heres the ideal way to apply dyes to a finished leather seat.

The approach of resurfacing leather requires sure techniques to abide by, which if not adopted accurately, will result in the dye to lift and peel from the seat. As I have always pressured in all my posts is the prepping approach. The only way to make a dye work on a leather seat look, really feel, and final is to clean up it totally and prep the surface area for optimum adhesion of the dye. Permit the leather dye do what it is created to do, you should not go over up grime.

The way to to do this is to clean up the leather seat with a scrub brush, a moderate cleaning soap, and warm h2o to begin. Scrub the seat from best to base, spending shut awareness to the creases and crevices in the seat, these are sites for the dye to lift if grime and goo is there. Wipe it down with a clean up towel, once again finding down in the creases.

Now the prepping approach goes on. In a spray bottle blend in 5ths h2o, rubbing alcohol, acetone, ammonia, and TSP substitute. Spray the seat in sections beginning at the lean back again, and scrub the leather with a pink scotch brite pad to scuff the leather just plenty of for the dye to adhere and to clear away any much more goo hiding out on the leather wiping clean up as you go with your towel. This remedy will also open the pours to leather and soften up the primary dye for better adhesion promotion.

When clean up and scuffed apply a thin coat of grip foundation or sticky primer to the seat with a moist Bounty paper towel. Implement a thin coat to full surface area of the seat, fundamentally exactly where your likely to dye is exactly where the primer will go. Dry it with your hair dryer. This will give you a excellent sticky foundation for the dye to adhere to and make your work final.

Dyeing the leather seat requires finesse and excellent gun management, the dye requires to be used in thin coats drying among coats or the dye will not adhere properly. One way you can inform if your applying the dye to thick is when you spray you h2o borne dye on the seat and it “fish eyes”. What this suggests is you will see minimal bubble like sites in the dye when you spray it on. So thin coats and dry among each individual coat. Commence your dyeing approach on the lean back again furthest from you and perform your way in direction of you, down, and out. This helps to maintain from dragging your hoses and cords around your freshly dyed seat.

Paint gun selection is up to you, but I will say a small element gun is selection. I have tried using the airbrush, I have tried using the Prevals, and I have tried using the siphon feed guns, and the greatest gun in my eyes for dyeing a leather seat is a gravity feed contact-up gun. They are small plenty of to maneuver all over in the car and maintain just the ideal amount of dye to end the work. I use the Sharpe 7040 HVLP a small very reliable gun, in reality I bought two, just one for back again up. It sprays a small plenty of sample to management, but not to small like an airbrush, and lays the dye nicely onto the seat. Paint gun selection to me is really crucial to building your work a accomplishment, so make the ideal selection when you pick your paint gun for optimum benefits.

When the seat is dyed, best coat with your h2o borne distinct. I always like to incorporate a minimal slip additive to the best coat to give it a tender really feel. Never fail to remember to crosslink the topcoat, this will help to give you much more chemical resistance. This approach helps to seal the dye and give you a more time long lasting leather resurfacing work.

Just after the topcoat is dry, apply your conditioner and stand back again an drool around how wonderful that seat appears to be like.

Now you have the confidence to stand back again and know your dye will continue to be and your work was accomplished ideal. I have been dyeing leather seats for a lengthy time and I would appreciate to hear your enter on Leather Resurfacing. There are so a lot of various items you will operate into when dyeing a leather seat, so fall me a query or two.

Leave a Reply

Your email address will not be published. Required fields are marked *